● Electromotive actuator with up to 40 Nm torque

● Clockwise and counterclockwise variants

● Running times from 10 to 90 seconds

● Different shaft designs available

● With 1 or 2 drive shaft ends, drive shafts interchangeable or available separately

● Can be equipped with electronic modules for control and position feedback signal via steady signals

● Internal and external position indication

● Drive shaft and camshaft can be disengaged separately

● Angular rotation Between 0° and max. 160° (scale range)

● Safety class I.

● Degree of protection IP54 (provided knockout holes remain closed for mounting or are closed off, with adequate cable entries)

● Environmental conditions Operation DIN EN 60721-3-3

                                             Climatic conditions Class 3K3

                                             Mechanical conditions Class 3M3

                                             Temperature range without integrated -20...+60 °C

                                             Humidity <95 % r.h

● Weight Approx. 3.3 kg

● Lifecycle 250,000 start cycles (OFF→ON→OFF) under load with the rated torque in the entire rotation angle range. 2,000,000 control cycles under load         with 75% of rated torque in rotation angle range of 10°